# Any other non-Glowforge forums?
**URL:** https://community.openglow.org/t/any-other-non-glowforge-forums/880
**Category:** General Discussions
**Created:** [December 14, 2020, 12:44am UTC](https://community.openglow.org/t/any-other-non-glowforge-forums/880 "2020-12-14T00:44:48Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@rhgrafix](https://community.openglow.org/u/rhgrafix)
#### Post date: [December 14, 2020, 12:44am UTC](https://community.openglow.org/t/any-other-non-glowforge-forums/880/1 "2020-12-14T00:44:48Z")
What I mean is, any other forums on using/fixing/modding the Glowforge that is not run by Glowforge itself, like this forum? Nothing like the ol’ “why would you want to do that?” that I get there. Mine is past warranty and I need to fix things.
Thanks!
---
### Author:  [@MH1944](https://community.openglow.org/u/MH1944)
#### Post date: [December 16, 2020, 4:40am UTC](https://community.openglow.org/t/any-other-non-glowforge-forums/880/2 "2020-12-16T04:40:39Z")
There used to be a Slack group but that never seemed to garner much attention. Plenty of GF-oriented FB groups but they tend to be populated by folks that don’t seem to have an aptitude for hacking HW.
---
### Author:  [@rhgrafix](https://community.openglow.org/u/rhgrafix)
#### Post date: [December 16, 2020, 9:10pm UTC](https://community.openglow.org/t/any-other-non-glowforge-forums/880/3 "2020-12-16T21:10:44Z")
Thanks, I noticed that too.
---
### Author:  [@ScottW514](https://community.openglow.org/u/ScottW514)
#### Post date: [December 18, 2020, 6:50pm UTC](https://community.openglow.org/t/any-other-non-glowforge-forums/880/4 "2020-12-18T18:50:10Z")
> [@MH1944](#):
>
> populated by folks that don’t seem to have an aptitude for hacking HW
The struggle is real.
---
### Author:  [@MH1944](https://community.openglow.org/u/MH1944)
#### Post date: [December 19, 2020, 9:02pm UTC](https://community.openglow.org/t/any-other-non-glowforge-forums/880/5 "2020-12-19T21:02:47Z")
My aptitude is more mechanical than electronic but I’d still like to have seen OpenGlow succeed. Completely understand why you need to stop the development though.