# ForgeFIRM Release v0.0.9 (beta)

**URL:** <https://community.openglow.org/t/forgefirm-release-v0-0-9-beta/1073>\
**Category:** ForgeFIRM\
**Created:** [October 19, 2026, 7:07pm UTC](https://community.openglow.org/t/forgefirm-release-v0-0-9-beta/1073 "2026-10-19T19:07:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ScottW514](https://community.openglow.org/user_avatar/community.openglow.org/scottw514/32/5_2.png) [@ScottW514](https://community.openglow.org/u/ScottW514)\
**Post date:** [October 19, 2026, 7:07pm UTC](https://community.openglow.org/t/forgefirm-release-v0-0-9-beta/1073/1 "2026-10-19T19:07:19Z")

</div>

ForgeFIRM v0.0.9 is [released](https://github.com/openglow-org/forgefirm/releases#release-v0.0.9).

As more people try out the beta releases, more hardware quirks are coming to light.

This release removed many of the setup wizard steps and made all but the intake fan and cooling flow detection wizards mandatory. This will allow those with devices that have some malfunctioning hardware, like cameras and beam sensors, to still use the firmware.

Note: Currently, safety switches, coolant sensors and the head accelerometer are still REQUIRED.

In addition to the setup wizard changes, there were some bug fixes and a retooling of the acceptance testing that runs on real hardware before each firmware release.

Full listing [here](https://github.com/openglow-org/forgefirm/compare/v0.0.8...v0.0.9).

---

<div class="post-metadata">

**Author:** ![ScottW514](https://community.openglow.org/user_avatar/community.openglow.org/scottw514/32/5_2.png) [@ScottW514](https://community.openglow.org/u/ScottW514)\
**Post date:** [October 21, 2026, 10:07am UTC](https://community.openglow.org/t/forgefirm-release-v0-0-9-beta/1073/2 "2026-10-21T10:07:32Z")

</div>

Split this topic on October 21, 2026, 10:07am UTC

A post was split to a new topic: [Coolant Flow Detection](https://community.openglow.org/t/coolant-flow-detection/1074)