# Now Compatible w/ GFUI **URL:** https://community.openglow.org/t/now-compatible-w-gfui/305 **Category:** OpenGlow Control Board **Created:** [August 25, 2018, 11:25pm UTC](https://community.openglow.org/t/now-compatible-w-gfui/305 "2018-08-25T23:25:57Z") **Posts on this page:** 8 **Page:** 1
### Author: ![ScottW514](https://community.openglow.org/user_avatar/community.openglow.org/scottw514/32/5_2.png) [@ScottW514](https://community.openglow.org/u/ScottW514) #### Post date: [August 25, 2018, 11:25pm UTC](https://community.openglow.org/t/now-compatible-w-gfui/305/1 "2018-08-25T23:25:57Z")
You could probably consider this a major milestone… I can now run the OpenGlow via the Glowforge Web Interface (GFUI). [![](https://community.openglow.org/uploads/default/original/1X/7b74456e8f83487e0541cc3a4179ed633b79f1cb.jpeg "OpenGlow working with Glowforge User Interface") ](https://www.youtube.com/watch?v=yER1vFzzYQs) Side note… For some reason, my power supply seems to be working mostly OK, now. Go figure. Here’s the resulting GOGM: ![IMG_20180825_181453](https://community.openglow.org/uploads/default/original/1X/a3eaf88955e3fbee9966c8af9d9291d048bb80ea.jpeg) There is still a LONG way to go - but at least I can start making regular use of my Glowforge again. ---
### Author: ![jamesdhatch](https://community.openglow.org/letter_avatar_proxy/v4/letter/j/e19b73/32.png) [@jamesdhatch](https://community.openglow.org/u/jamesdhatch) #### Post date: [August 26, 2018, 12:00am UTC](https://community.openglow.org/t/now-compatible-w-gfui/305/2 "2018-08-26T00:00:40Z")
Awesome job. It’s been a long road but you’ve done some incredible work! ---
### Author: ![PTL](https://community.openglow.org/letter_avatar_proxy/v4/letter/p/dc4da7/32.png) [@PTL](https://community.openglow.org/u/PTL) #### Post date: [August 27, 2018, 2:56pm UTC](https://community.openglow.org/t/now-compatible-w-gfui/305/3 "2018-08-27T14:56:11Z")
> [@ScottW514](#): > > You could probably consider this a major milestone After eviscerating the machine and redesigning the board, yeah, I’m sure that feels good! ---
### Author: ![motocoder](https://community.openglow.org/user_avatar/community.openglow.org/motocoder/32/129_2.png) [@motocoder](https://community.openglow.org/u/motocoder) #### Post date: [August 27, 2018, 7:07pm UTC](https://community.openglow.org/t/now-compatible-w-gfui/305/4 "2018-08-27T19:07:08Z")
Wow, amazing! ---
### Author: ![mkruse](https://community.openglow.org/letter_avatar_proxy/v4/letter/m/bb73d2/32.png) [@mkruse](https://community.openglow.org/u/mkruse) #### Post date: [August 31, 2018, 2:27am UTC](https://community.openglow.org/t/now-compatible-w-gfui/305/5 "2018-08-31T02:27:17Z")
Nice work. Glad to hear you got power supply magically healed! ---
### Author: ![MH1944](https://community.openglow.org/letter_avatar_proxy/v4/letter/m/77aa72/32.png) [@MH1944](https://community.openglow.org/u/MH1944) #### Post date: [September 1, 2018, 11:11pm UTC](https://community.openglow.org/t/now-compatible-w-gfui/305/6 "2018-09-01T23:11:35Z")
Congratulations! Hopefully your success will continue. ---
### Author: ![xienwolf](https://community.openglow.org/letter_avatar_proxy/v4/letter/x/43a26b/32.png) [@xienwolf](https://community.openglow.org/u/xienwolf) #### Post date: [June 12, 2019, 4:58pm UTC](https://community.openglow.org/t/now-compatible-w-gfui/305/7 "2019-06-12T16:58:24Z")
With being able to use the GFUI, are you at full functionality through their UI? (Camera works and can run calibration routine) Haven’t poked around too much yet, but if you are at full base functionality, what have you managed to add? Hardwired internet? ---
### Author: ![eflyguy](https://community.openglow.org/letter_avatar_proxy/v4/letter/e/9f8e36/32.png) [@eflyguy](https://community.openglow.org/u/eflyguy) #### Post date: [October 22, 2019, 8:35pm UTC](https://community.openglow.org/t/now-compatible-w-gfui/305/8 "2019-10-22T20:35:30Z")
What’s the latest on this? I’m not having issues with mine but given some of the issues I’ve seen crop up on the official site, I wonder if it’s only a matter of time. No way am I sending my machine back for repairs if they do.